The long-term use of metal parts, mechanical parts and equipment will inevitably make the parts stained with oil and stains. The oil stains on metal parts are generally the adhesion formed by the mixture of oil, dust and rust, which are usually difficult to be diluted and dissolved by water. 


In order to make the equipment operate effectively and ensure the processing technology of mechanical parts, it is necessary to use professional metal oil cleaning agent, So how to clean it efficiently, economically and conveniently?

1. Choose according to the material on the cleaned metal surface:

The cleaning methods of mechanical parts and large metal equipment are different, and the solvents used are also different. Generally speaking, solvent based metal cleaning agent is used for cleaning parts, and water-based metal cleaning agent is used for cleaning large metal equipment.

2. How to select water-based metal surface cleaning agent and solvent based metal surface cleaning agent:

If the metal workpiece is required to volatilize quickly and has the requirement of rust prevention, the solvent based cleaning agent can be considered. If you want to save cost, you can consider using a water-based cleaning agent and start cleaning after dilution.

3. Cleaning process adopted:

If ultrasonic or spray cleaning is used, low bubble ultrasonic cleaning agent is generally used; special electrolytic cleaning agent is used for electrolytic cleaning; solvent cleaning agent is used for manual scrubbing or steam cleaning.

4. Whether rust prevention is necessary when using oil cleaning agent on metal surface:

In addition to some equipment and precision parts that need to work for a long time, most other equipment is not necessary for rust prevention. Therefore, most enterprises choose water-based metal cleaning agent with low comprehensive cleaning cost and no antirust function.

5. Combination of solvent based metal cleaning agent and production process:

If the antirust effect is not ideal, you can consider adding a cleaning tank and adding antirust agent in the tank, the metal workpiece in the tank once, can achieve the ideal antirust effect, the consumption of antirust agent is small, will not increase too much cost.

With the rapid development of industrialization, users have higher requirements for metal parts. The processing of many metal parts is more and more mechanized, which has high requirements for the maintenance of products. How to clean the dirt on the metal parts is a problem that metal manufacturers are very concerned about, and it is also a must to do degreasing treatment before the subsequent metal processing operation, so as to avoid the influence of the subsequent welding, painting and other processes due to the oil pollution.